E-mail:
sales@gwdl.com
Telephone:
+86 15637962277
 Email:sales@gwdl.com  Telephone:0086 0379-64896659|64562296|69936789

Rotary Tilting Tube Furnace

 The range of GWL horizontal rotating tube furnaces offers the benefits of simultaneous heating and mixing of the sample, in addition to the use of an inert atmosphere. 

  The furnaces are suitable for continuous material processing. Residence time in the heated zone depends on the degree of inclination and the rotating speed (which can be controlled by the customer) and the length of the working tube, in addition to the flow properties of the material. 

  The design of the split furnace, drive system and feeder/ collection assemblies allows the work tube to be easily removed and replaced. 

  The single zone and 3-zone split tube furnaces have a maximum operating temperature of 1200 °C. All models are available with maximum heated lengths of either 9000 mm or 12000 mm. The angle of inclination can be easily adjusted between horizontal and 15 °.A safety switch automatically prevents heating when the furnace is opened.

  The system is specially made to prevent the danger of closure of the exhaust port, the blockage of the exhaust port and the excessive pressure of the furnace tube. The signal is obtained by the electric contact pressure meter or pressure sensor then the drive control module will close the electromagnetic inlet valve and starts the electromagnetic exhaust valve and the alarm. to ensure the furnace can be used properly and safely.

  Base on gas atmosphere, to prevent the gas leakGas leakage alarm detected (indoor) air toxic,   dangerous and other gas content exceeds a certain value, then the drive control module will shut-down the furnace, closes the inlet valve and open the air exhaust, to get the better and safer working environment.

  *It is essential to discuss your application with us to ensure the suitability of the material for use in this equipment. 

Standard features

  • 1200 °C maximum operating temperature; normal operating temperature range 650 °C - 1150 °C

  • Heated lengths options(3000、4000、5000、6000、9000、12000 and so on)

  • Heating tube diameter(80、90、100、110、150、220、300、350、500、600)

  • Single zone models fitted with PID controller with the single ramp to setpoint

  • 3-zone models: Centre zone fitted with PID controller. End zones fitted with slave controllers

  • Single or 3-zone models

  • Adjustable inclination and rotation speeds offer the flexibility of residence time

  • Work tube rotation speed 1.5 to 10.0 revolutions per minute

  • 5 litre capacity vibratory feeder and hopper

  • The temperature controllers and associated equipment are housed within the integral control box

  • Wire elements in high-quality vacuum formed insulation ensures fast heat up, excellent temperature uniformity and short cooldown times

  • Vacuum degree can be -0.1Mpa




  Options (specify these at time of order)

  • Quartz (up to 1200 °C) or metallic (up to 800 °C) work tubes

  • 5 liter capacity heavy duty vibratory feeder and hopper

  • Inert gas packages available on request

  • Content may be subject to modifications or corrections


*Content may be subject to modifications or corrections


Send Message
Related Products