BOTTOM LOADING FURNACE

  GWL Series high-temperature screw mandrel lift furnace, The combination of the control system and furnace chamber, Furnace lining using vacuum forming high purity alumina light material. Screw mandrel lifting method, more convenient to use.

  The system is specially made to prevent the danger of closure of the exhaust port, the blockage of the exhaust port and the excessive pressure of the furnace tube. The signal is obtained by the electric contact pressure meter or pressure sensor then the drive control module will close the electromagnetic inlet valve and starts the electromagnetic exhaust valve and the alarm. to ensure the furnace can be used properly and safely.

Standard features

• 1700°C maximum operating temperature

• Furnace chamber dimension( 500*500*500, 800*500*500, 800*800*800, 1200*750*600, 1300*600*600 MM)

• Vacuum Degree -0.1Mpa

• Water cooling equip circulating water pump and tank
  

• Double layer furnace shell air cooling ensure the surface temperature less than 45℃

• Electric screw mechanical Drive (Pass in and out speed adjustable)

• 1 to 3 quantity loading platform(Can Be Customized)

• Loading platform capacity 1000 Kg( Can be customized)

• Temperature accuracy ：±1℃; Temperature uniformity：±1℃(Base on Heating zone size) 

• Vacuum formed, low thermal mass insulation

• Silicon carbide rod or silicon molybdenum rod fitted as standard

• Double layer protection(over current, over temperature and over voltage etc)

• Touch screen control

Options (specify these at time of order)

• Control software and system.

• Multi-face heating

• Anti-corrosion

• Multi-temperature control

*Content may be subject to modifications or corrections